Transmitter and Receiver Pairing Instructions

Syncing your New Transmitter to an Existing Receiver:

  1. Install the new transmitter on your vehicle with the included instructions.
  2. On the garage receiver, insert a paperclip straight into the small hole between the black push-button and blinking LED. You should feel a small, hidden button inside the hole click.
  3. Hold the paper clip in position until the the receiver's LED quickly blinks 4 times. Remove the paperclip. The receiver is now in "Learn Mode."
  4. Turn on the vehicle's ignition key and flash the high-beams 2 times slowly to pair the transmitter. Note: Make sure the vehicle with the new transmitter installed is within range of the receiver. The garage receiver's LED will quickly blink 4 times indicating the new transmitter has been paired. It will then automatically exit "Learn Mode" and will resume its normal status blinking. 

Syncing your New Receiver to an Existing Vehicle Transmitter:

  1. Install the new receiver in your garage with the included instructions or our online videos.
  2. On the garage receiver, insert a paperclip straight into the small hole between the black push-button and blinking LED. You should feel a small, hidden button inside the hole click.
  3. Hold the paper clip in position until the the receiver's LED quickly blinks 4 times. Remove the paperclip. The receiver is now in "Learn Mode."
  4. Turn on the vehicle's ignition key and flash the high-beams 2 times slowly to pair the transmitter. Note: Make sure the vehicle with the new transmitter installed is within range of the receiver. Your garage receiver's LED will quickly blink 4 times indicating the new transmitter has been paired. It will then automatically exit "Learn Mode" and will resume its normal status blinking.
  5. Repeat for each transmitter you wish to use to open your garage.